"lang"
{
"Language" "English"
"Tokens"
{

"VRController_NoDriver" "No Driver"
"VRController_NoDisplay" "No Display"
"SteamUniverse_NoSteamAvailable" "Steam Error"
"SteamUniverse_InvalidSteamUniverse" "Invalid Steam Universe"
"SteamUniverse_Public" "Public"
"SteamUniverse_Beta" "Beta"
"SteamUniverse_Internal" "Internal"
"SteamUniverse_Dev" "Dev"
"CompositorError_NoCompositorRequested" "SteamVR Error"
"CompositorError_Running" "Running"
"CompositorError_FailedToStartButNoError" ""
"VRState_Off" "Off"
"VRState_Searching" "Searching..."
"VRState_SearchingWithAlert" "Searching..."
"VRState_Ready" "Ready"
"VRState_ReadyWithAlert" ""
"VRState_NotReady" ""
"VRState_Standby" "Standing by"
"VRState_UnknownState" ""

"Startup_OpenGLIsNotInstalled" "Please install OpenGL before using SteamVR."
"Startup_DisplayLinkIsInstalled" "DisplayLink is incompatible with SteamVR. Please uninstall DisplayLink drivers and software from your computer, then restart it before using SteamVR."

"StatusError_NoHMDAvailable" "No headset available."
"StatusError_HMDDoesNotTrack" "Your headset is not currently tracking."
"StatusError_NoCompositorAvailable" "A key component of SteamVR is not working correctly."
"StatusError_CompositorNotFullscreen" "A key component of SteamVR is not working correctly."
"StatusError_CompositorNotRunning" "A key component of SteamVR is not working correctly."
"StatusError_CompositorTooManyRunning" "A key component of SteamVR is not working correctly."
"StatusError_PrismNotRunning" "A key component of SteamVR is not working correctly."
"StatusError_VRServerNotRunning" "A key component of SteamVR is not working correctly."
"StatusError_TrackingDevice_NotValid" "This device is not recognized."
"StatusError_Chaperone_Error" "SteamVR has encountered an error with its Chaperone system."
"StatusError_LighthouseEvent" "SteamVR has encountered a Tracking system error."
"StatusError_SteamVRServiceNotInstalled" "SteamVR helper service is not installed."
"StatusError_UnknownError" "Unknown Error (%1)" 

"StatusWarning_None" ""
"StatusWarning_System_NoSteamAvailable" "Please start Steam"
"StatusWarning_System_Chaperone_Warning" "Please perform Room Setup"
"StatusWarning_TrackingDevice_FirmwareUpdateNeeded" "Device update required"
"StatusWarning_TrackingDevice_NoPose" "Searching..."
"StatusWarning_System_ConnectionRefusedBySteam" "Steam is having trouble connecting..."
"StatusWarning_System_NeedDirectModeGraphicsDriverUpdate" "Please update your computer's graphics driver"
"StatusWarning_UnknownWarning" "Unknown Warning (0x%1)"

"DismissableWarning_DismissButton" "Dismiss"
"DismissableWarning_None" " "
"DismissableWarning_RunTutorialAgain" "Begin Tutorial (0x0001)"
"DismissableWarning_BasestationsTooFarApart" "Base Stations Too Far Apart (0x0002)"
"DismissableWarning_OpticalBasestationSyncWarning" "Base Station Warning (0x0004)"
"DismissableWarning_BasestationSingleBaseModeHint" "Base Station Tip (0x0008)"
"DismissableWarning_WarningsForTheFirstTime" "Warnings for the first time (0x0010)"
"DismissableWarning_MissedFrames" "Missed Frames (0x0020)"
"DismissableWarning_PowerSchemeIsNotHighPerformance" "Performance Error (0x0040)"
"DismissableWarning_BluetoothDriverNeedsInstallation" "Bluetooth driver required (0x0080)"
"DismissableWarning_BluetoothDriverNeedsUpdate" "Bluetooth driver update required (0x0100)"
"DismissableWarning_BluetoothLinkServiceNotFound" "Bluetooth unavailable (0x0200)"
"DismissableWarning_BluetoothLinkServiceError" "Bluetooth unavailable (0x0400)"
"DismissableWarning_BluetoothLinkCommunicationFailed" "Bluetooth communication failed (0x0800)"
"DismissableWarning_SomeDisplaysAreMirroring" "Some displays are mirroring (0x1000)"
"DismissableWarning_UnknownHardwareDetected" "New Device Detected (0x2000)"
"DismissableWarning_WindowsAeroDisabled" "Display Warning (0x4000)"
"DismissableWarning_Windows8" "Windows 8 (0x8000)"
"DismissableWarning_DisplayInExtendedMode" "Display Warning (0x10000)"
"DismissableWarning_BasestationsSyncOnBeamChannelConflict" "Base Station Conflict (0x400000)"
"DismissableWarning_SteamVRInSafeMode" "SteamVR Safe Mode (0x1000000)"

"DismissableWarning_Detected" "Detected"
"DismissableWarning_TimeFormat" "h:mm AP"

"TrackedDeviceClass_Invalid" "Invalid"
"TrackedDeviceClass_HMD" "Headset"
"TrackedDeviceClass_Controller" "Controller"
"TrackedDeviceClass_TrackingReference" "Base Station"
"TrackedDeviceClass_GenericTracker" "Tracker"
"TrackedDeviceClass_Unknown"  "Unknown Tracked Device"
"StatusCheckInterval_Never" "Never"
"StatusCheckInterval_Seldom" "Seldom (5 sec)"
"StatusCheckInterval_Normal" "Normal (1 sec)"
"StatusCheckInterval_Often" "Often (100 msec)"
"Log_Window_Title" "Log - %1"
"Log_Button_Clear" "Clear"
"Log_Button_ShowInExplorer" "Show in Explorer"
"Log_Button_LoadCompleteFile" "Load Complete File"
"Log_Text_MoreLineInTheActualFile" "MORE LINES IN THE ACTUAL FILE\n\n"

"Status_Title" "SteamVR Status"
"Status_MenuButton_SteamVR" "STEAMVR"
"Status_MenuButton_SteamVR_Branch" "STEAMVR %1"
"Status_HMD" "Headset"
"Status_Controller" "Controller"
"Status_Base" "Base Station"
"Status_Starting" "Starting"
"Status_Quitting" "Exiting"

"ShutdownWhileAppRunning_Title" "Quit SteamVR?"
"ShutdownWhileAppRunning_Format" "This will also quit '%1'. Do you wish to quit now?"

"RebootWhileAppRunning_Title" "Restart SteamVR?"
"RebootWhileAppRunning_Format" "This will also quit '%1'. Do you wish to restart now?"

"FrameTiming_Title" "Frame Timing"
"FrameTiming_Idle" "Idle"
"FrameTiming_Vsync" "Vsync"
"FrameTiming_Compositor" "Compositor"
"FrameTiming_PreSubmit" "Application (scene)"
"FrameTiming_PostSubmit" "Application (other)"
"FrameTiming_MisPresented" " --- Reprojected"
"FrameTiming_FirstView" " --- First Viewed"
"FrameTiming_ReadyForUse" " --- Ready For Use"
"FrameTiming_Other" "Other"
"FrameTiming_LateStart" "Late Start"
"FrameTiming_Presented" " --- Present (count)"
"FrameTiming_Predicted" " --- Predict (extra)"
"FrameTiming_Throttled" " --- Throttle (frames)"
"FrameTiming_Pause" "Pause"
"FrameTiming_Raw" "Details"
"FrameTiming_ShowInHeadset" "Show in Headset"

"FrameTiming_5sStats" "Drops in last %1s:\n  %2 single frame\n  %3 2 frame\n  %4 3 frame\n  %5 4 or more\n Total %6\n"
"FrameTiming_Config" "Warn if over %3s we see\n   %1 single frames missed\n   or %2 multi frame drops"

"SteamVRSystemState_Off" "Off"
"SteamVRSystemState_Ready" "Now Playing"
"SteamVRSystemState_NotReady" " "
"SteamVRSystemState_Connecting" "Searching..."
"SteamVRSystemState_Standby" "Standing by"
"SteamVRSystemState_Shutdown" "Exiting VR..."
"SteamVRSystemState_Installing" "Hardware setup in progress..."
"SteamVRSystemState_Restart" "Restarting SteamVR..."
"SteamVRSystemState_Startup" "Starting VR..."
"SteamVRSystemState_ShutdownRequested" "Exiting VR..."
"SteamVRSystemState_PauseRequested" "Pausing..."
"SteamVRSystemState_Paused" "Paused"
"SteamVRSystemState_UnpauseRequested" "Starting..."
"SteamVRSystemState_Paused_FirmwareUpdate" "Updating devices..."
"SteamVRSystemState_PseudoState_Waiting" "Waiting..."
"SteamVRSystemState_PseudoState_ReadyWithNoApp" ""
"SteamVRSystemState_PseudoState_Welcome" "Welcome"

"SteamVRSystemState_Off_Application" ""
"SteamVRSystemState_Ready_Application" "%1"
"SteamVRSystemState_NotReady_Application" " "
"SteamVRSystemState_Connecting_Application_Lighthouse" "Make sure headset can see bases"
"SteamVRSystemState_Connecting_Application_InsideOutCamera" "Make sure headset can see the play area"
"SteamVRSystemState_Connecting_Application_OutsideInCamera" "Make sure tracking cameras can see the headset"
"SteamVRSystemState_Standby_Application" "Put on your headset to wake VR"
"SteamVRSystemState_Shutdown_Application" ""
"SteamVRSystemState_Installing_Application" ""
"SteamVRSystemState_Restart_Application" ""
"SteamVRSystemState_Startup_Application" ""
"SteamVRSystemState_ShutdownRequested_Application" ""
"SteamVRSystemState_PauseRequested_Application" ""
"SteamVRSystemState_Paused_Application" ""
"SteamVRSystemState_UnpauseRequested_Application" ""
"SteamVRSystemState_Paused_FirmwareUpdate_Application" ""
"SteamVRSystemState_PseudoState_Waiting_Application" ""
"SteamVRSystemState_PseudoState_ReadyWithNoApp_Application" ""
"SteamVRSystemState_PseudoState_Welcome_Application" "Please plug in your VR headset"

"MenuAction_StatusBar" "Status"
"MenuAction_RoomOverview" "View Room Overview"
"MenuAction_Settings" "Settings"
"MenuAction_LegacySettings" "Developer Settings"
"MenuAction_BluetoothSettings" "Bluetooth Settings"
"MenuAction_BaseStationSettings" "Base Station Settings"
"MenuAction_DiagnosticsMenu" "Diagnostics"
"MenuAction_MainPlaylistMenu" "Playlists"
"MenuAction_PlaylistEditor" "Playlist Editor"
"MenuAction_PlaylistPlayer" "Playlist Player"
"MenuAction_RunPlaylist" "Run Playlist"
"MenuAction_RecentPlaylist" "Recent"
"MenuAction_ClearRecentPlaylist" "Clear Recent Playlist"
"MenuAction_Quit" "Quit"
"MenuAction_About_vrmonitor" "About SteamVR"
"MenuAction_AboutQt" "About Qt"
"MenuAction_Help" "Help"
"MenuAction_Devices" "Devices"
"MenuAction_Developer" "Developer"
"MenuAction_WebDevTools" "Web Dev Tools"
"MenuAction_SteamVRWebsite" "SteamVR Support"
"MenuAction_SteamVRCommunity" "SteamVR Community"
"MenuAction_SteamVRHardwareDiscussions" "SteamVR Hardware Discussions"
"MenuAction_SteamVRDeveloperSupport" "SteamVR Developer Support"
"MenuAction_SteamWorksDeveloperSupport" "SteamWorks Developer Support"
"MenuAction_CreateSystemReport" "Create System Report"
"MenuAction_ResetSeatedPosition" "Reset Seated Position"
"MenuAction_SystemReportViewer" "System Report Viewer"
"MenuAction_DisplayFrameTiming" "Advanced Frame Timing"
"MenuAction_RecordTrackingData" "Record Tracking Data"
"MenuAction_StopRecording" "Stop Recording"
"MenuAction_Crash" "Crash"
"MenuAction_RefreshStatusNow" "Refresh Status Now"
"MenuAction_ViewLogDirectory" "View Logs"
"MenuAction_ShowLogDirectory" "Show Log Directory"
"MenuAction_ShowConfigDirectory" "Show Config Directory"
"MenuAction_ShowRuntimeDirectory" "Show Runtime Directory"
"MenuAction_RunRoomSetup" "Room Setup"
"MenuAction_RunTutorial" "Tutorial"
"MenuAction_RunMediaPlayer" "Media Player"
"MenuAction_RecentPlaylists" "Recent Playlists"
"MenuAction_Diagnostics" "Advanced"
"MenuAction_Directories" "Directories"
"MenuAction_LogFiles" "Log Files"
"MenuAction_More" "More"
"MenuAction_CouldNotReadLogFiles" "Could not read logfiles"
"MenuAction_PairingWizard" "Pair Controller"
"MenuAction_FirmwareUpdate" "Update Device"
"MenuAction_SetLogDirectory" "Set Log Directory"
"MenuAction_SetConfigDirectory" "Set Config Directory"
"MenuAction_ShowDisplayMirror" "Show VR View"
"MenuAction_HideDisplayMirror" "Hide VR View"
"MenuAction_DisplayMirror" "Display VR View"
"MenuAction_PerformanceGraph" "Display Performance Graph"
"MenuAction_ShowControllerBinding" "Controller Settings"
"MenuAction_ShowManageTrackers" "Manage Vive Trackers"
"MenuAction_UpdateFirmware" "Update Device"
"MenuAction_ForceFirmware" "Force Firmware"
"MenuAction_DirectMode" "Direct Display Mode"
"MenuAction_EnableDirectMode" "Enable Direct Display Mode"
"MenuAction_DisableDirectMode" "Disable Direct Display Mode"
"MenuAction_PairController" "Pair Controller"
"MenuAction_PowerOffController" "Turn Off Controller"
"MenuAction_IdentifyBaseStation" "Identify Base Station"
"MenuAction_Workshop" "Workshop"
"MenuAction_Workshop_UploadItem" "Upload New Background"
"MenuAction_Workshop_EditItem" "Modify Existing Background"
"MenuAction_Workshop_RunTools" "Create/Modify an Environment"
"MenuAction_Workshop_ViewWiki" "SteamVR Environments Wiki"
"MenuAction_Workshop_Browse" "Browse Workshop"
"MenuAction_ModelDirectory_Browse" "Browse Model Directory"
"MenuAction_WakeupAllBaseStations" "Wake Up Base Stations"
"MenuAction_KnockKnock" "Knock Knock"
"MenuAction_PairTracker" "Pair Tracker"
"MenuAction_PowerOffTracker" "Turn Off Tracker"
"MenuAction_ReportABug" "Report a Bug"
"MenuAction_WebConsole" "Web Console"
"MenuAction_OverlayViewer" "Overlay Viewer"
"MenuAction_DebugCommands" "Debug Commands"
"MenuAction_WebDevToolsPlaceholder" "No Instances Found"


"MonitorController_SwitchDirectMode_Header" "Direct Display Mode"
"MonitorController_EnableDirectMode_Text" "SteamVR will restart after enabling Direct Display Mode. Do you want to continue?"
"MonitorController_DisableDirectMode_Text" "WARNING: Disabling Direct Display Mode will extend the headset onto the desktop, and is not recommended. Are you sure you want to disable Direct Display Mode? SteamVR will restart after this change is made."

"MonitorController_SwitchSafeMode_Header" "Safe Mode"
"MonitorController_EnableSafeMode_Text" "<span>Safe Mode</span> can be used to limit SteamVR processes to the essentials when compatibility issues occur.<p>Are you sure you want to enable Safe Mode? SteamVR will restart after this change is made.<p><a style ='color: rgb(212, 212, 212);' href='https://support.steampowered.com/kb_article.php?ref=8566-SDZC-9326'>Learn more</a>."

"TrayIcon_Tooltip_vrmonitor" "SteamVR Status"
"MonitorController_SelectRecordingDirectory" "Select Recording Directory"
"MonitorController_LoadPlaylist" "Load Playlist"
"MonitorController_Information_Title" "SteamVR"
"MonitorController_RestartSystemNotPossible" "At this time SteamVR cannot be restarted automatically. \nPlease quit SteamVR and try again. If issues persist, please restart your computer."
"MonitorController_NotAbleToMakeCompositorFullscreen" "SteamVR is having trouble enabling fullscreen mode."
"MonitorController_ApplicationsInterfaceNotAvailable" "Could not start %1. This application's interface is not available."
"MonitorController_ApplicationCouldNotStart" "Could not start %1: %2."
"MonitorController_Version" "Version %1"
"MonitorController_ResetCompleteSetup_Text" "This will completely reset your installation of SteamVR and restart the application."
"Settings_Title" "SteamVR Settings"
"Settings_Bluetooth_Title" "Bluetooth Settings"
"Settings_BaseStations_Title" "Base Station Settings"
"Settings_Developer_Title" "Developer Settings"
"Settings_Checks" "Checks"
"Settings_Notifications" "Notifications"
"Settings_Applications" "Application"
"Settings_DisplayMode" "Display Mode"
"Settings_DisplayMode_Extend" "Extend desktop to display"
"Settings_DisplayMode_MirrorWindow" "VR View"
"Settings_OpenVRPaths" "OpenVR Paths"
"Settings_Reset" "Reset"
"Settings_PerfCheck" "PerfCheck"
"Settings_CheckForSteam" "Check for Steam"
"Settings_CheckStatus" "Check Status"
"Settings_Firmware_UpdateAvailable" "Update available"
"Settings_NotAvailableAtThisTime" "Not all settings are available at this time"
"Settings_EnableLinuxGPUProfiling" "Enable GPU profiling"
"Settings_EnableDashboard" "Enable VR Dashboard"
"Settings_ArcadeMode" "Enable arcade mode"
"Settings_PauseOnStandby" "Pause rendering when headset is idle"
"Settings_DebugInputBindings" "Enable debugging options in the input binding user interface"
"Settings_DoNotFadeToGrid" "Do not fade to grid when app hangs"

"Settings_ShowPlaylistMenu" "Show playlist menu"
"Settings_StartSteamVROnAppLaunch" "Start SteamVR when a VR application starts"

"Settings_RestartText" "<html><B>Restart the environment after making a change to these paths.</b></html>"
"Settings_RuntimePath" "Runtime Path:"
"Settings_Set" "Set..."
"Settings_ConfigPath" "Config Path:"
"Settings_LogPath" "Log Path:"
"Settings_Refresh" "Refresh"
"Settings_SetSelectedPaths" "Set Selected Paths"
"Settings_SelectRuntimePath" "Select Runtime Path"
"Settings_SelectConfigPath" "Select Config Path"
"Settings_SelectLogPath" "Select Log Path"
"Settings_ResetQtSettings" "Reset Qt Settings"
"Settings_ResetRuntimeAndQuit" "Reset Runtime based on SteamVR location and Restart"
"Settings_ResetCompleteSetupAndQuit" "Reset Complete Setup and Restart"
"Settings_ResetChaperoneToHeadsetInMiddleOfFloor" "Reset Chaperone to Headset in middle of floor"
"Settings_SmallSpace" "Small Space"
"Settings_MediumSpace" "Medium Space"
"Settings_LargeSpace" "Large Space"
"Settings_GiganticSpace" "Gigantic Space"
"Settings_RemoveAllUSBDevices" "Remove all SteamVR USB devices"
"Settings_ResetChaperoneToDK2Default" "Reset Chaperone Data to Oculus Rift DK2 Default"

"Settings_Information_Title" "SteamVR"
"Settings_ResetQtSettings_Text" "You want to reset the Qt settings.\n\nAre you sure?"
"Settings_ResetRuntimeBasedOnVRMonitorAndQuit_Text" "This will reset the SteamVR path based on the location of the SteamVR executable, and restart SteamVR. \n\nAre you sure?"
"Settings_RemoveAllRelevantUSBDevices_Text" "This will remove all SteamVR USB devices from the system. You will need to unplug and then reconnect the devices in again, so the system installs drivers.\n\nAre you sure?"
"Settings_RemoveAllRelevantUSBDevices_FailToStart" "The helper application to remove the USB devices was not able to start.\nMake sure that you can run this application as admin.\n"
"Settings_RemoveAllRelevantUSBDevices_Crash" "The helper application to remove the USB devices crashed.\nPlease try again.\n"
"Settings_RemoveAllRelevantUSBDevices_Success" "All relevant USB devices are removed. Please disconnect any VR USB cables and restart your computer, then connect your devices again.\n"
"Settings_RemoveAllRelevantUSBDevices_PartialSuccess" "Some relevant USB devices could not be removed. Please try again.\n"
"Settings_DisableEnhancedPowerManagement_FailToStart" "The helper application was not able to start.\nMake sure that you can run this application as admin.\n"
"Settings_DisableEnhancedPowerManagement_Crash" "The helper application crashed.\nPlease try again.\n"
"Settings_DisableEnhancedPowerManagement_Success" "Windows Enhanced Power Management has been disabled for installed SteamVR USB devices.\n\nYou must replug the USB devices for changes to take effect.\n"
"Settings_NotificationDoNotDisturb_Info" " "
"Settings_NotificationDoNotDisturb_Text" "Do Not Disturb - Suppress Steam notifications in VR"
"Settings_NotificationKnockKnock_Text" "Display Knock Knock"
"Settings_NotificationKnockKnock_Info" "This lets people get the attention of the person using VR."

"Settings_Developer_Text" "Developer Settings"
"Settings_Developer_Info" "Shows advanced settings and options for developers"
"Settings_StatusWindowAlwaysOnTop_Info" " "
"Settings_StatusWindowAlwaysOnTop_Text" "Display always on top"
"Settings_StatusWindowMinimizeToTray_Text" "Minimize to the system tray"
"Settings_StatusWindowHidePopups_Text" "Suppress VR warnings and alerts when minimized"
"Settings_HomeAppCheck" "Use SteamVR Home"
"Settings_HomeAppDesc" "Enjoy virtual environments, social features, and more."
"Settings_NightModeCheck" "Night Mode"
"Settings_NightModeDesc" "Dim the headset until 5:00 AM (or until SteamVR is restarted)."
"Settings_LockedModeCheck" "Enable headset while computer is locked"
"Settings_LockedModeDesc" ""

"Settings_Dashboard_Explanation" "These applications will be accessible as overlays in the VR Dashboard."
"Settings_BaseStationsWakeUpAll" "Wake Up All Base Stations"
"Settings_BaseStationsWakeUpAll_Explanation" "Wakes all base stations participating in remote power management."
"Settings_EnableScreenshots_Info" "Use System button + Trigger to take a screenshot"
"Settings_EnableScreenshots_Text" "Enable Screenshots (BETA)"
"Settings_DefaultScreenshotType_Text" "Screenshot Type"
"Settings_DefaultScreenshotType_Info" "Select the default type of screenshot to take.  Note that many VR applications might not support the requested type and will downgrade to stereoscopic."
"Settings_DefaultScreenshotType_Mono" "Normal"
"Settings_DefaultScreenshotType_Stereo" "Stereoscopic"
"Settings_DefaultScreenshotType_Cubemap" "Cubemap"
"Settings_DefaultScreenshotType_MonoPanorama" "Mono Panorama"
"Settings_DefaultScreenshotType_StereoPanorama" "Stereo Panorama"

"Settings_UseBluetoothLink_Text" "Enable Bluetooth"
"Settings_UseBluetoothLink_Info" "Access wireless base station power management and device updates with Bluetooth. This may also enable additional features for some VR devices."

"Settings_Bluetooth_ServicesNotAvailable" "Bluetooth not available"
"Settings_Bluetooth_Driver_Install" "Install Bluetooth Driver"
"Settings_Bluetooth_Driver_Install_Description"	"Install the Link Box Bluetooth driver to enable wireless Bluetooth communication features. This requires administrative credentials."
"Settings_Bluetooth_Driver_Update" "Update Bluetooth Driver"
"Settings_Bluetooth_Driver_Update_Description" "Update the Link Box Bluetooth driver to enable wireless Bluetooth communication features. This requires administrative credentials."
"Settings_Bluetooth_RetryConnection" "Retry Connection"

"Settings_BaseStation_BluetoothBusy" "Waiting for Bluetooth..."
"Settings_BaseStation_BluetoothRequired" "Please enable Bluetooth to access wireless features such as base station power management and updates."
"Settings_BaseStation_OpenSettingsBluetooth" "View Bluetooth Settings"
"Settings_BaseStation_PowerManagement" "Power Management"
"Settings_BaseStation_PowerManagement_Explanation" "Wake up and set base stations into Standby mode based on your use of SteamVR."
"Settings_BaseStation_ScanForBaseStations" "Scan For Base Stations"
"Settings_BaseStation_ScanForBaseStations_Explanation" "Discover familiar base stations which are broadcasting their Bluetooth presence."
"Settings_BaseStation_ConfigureBaseStations" "Configure Base Station Channels"
"Settings_BaseStation_ConfigureBaseStations_Explanation" "Discover base stations and configure their channels to avoid conflicts."
"Settings_BaseStation_BaseStation10" "Base Station 1.0"
"Settings_BaseStation_BaseStation20" "Base Station 2.0"
"Settings_BaseStation_ContinueBaseStationUpdate" "Recover From Incomplete Update"
"Settings_BaseStation_ContinueBaseStationUpdate_Explanation" "Fix an interrupted or cancelled base station update that is preventing it from tracking normally."

"Settings_USB_Component_Hub" "Hub"
"Settings_USB_Component_HubController" "Hub Controller"
"Settings_USB_Component_HubBluetooth" "Bluetooth"
"Settings_USB_Component_WatchmanBoard" "Tracking Board"
"Settings_USB_Component_Camera" "Camera"
"Settings_USB_Component_Audio" "Audio Device"
"Settings_USB_Component_HTCBoard" "Main Board"
"Settings_USB_Component_Dongle1" "Wireless Receiver 1"
"Settings_USB_Component_Dongle2" "Wireless Receiver 2"

"Settings_USB_ViveDevices" "<b>Devices</b>"
"Settings_USB_PressRefresh" "<b>Click 'Refresh' to check for device connections...</b>"
"Settings_USB_LookingForConnections" "<b>Checking Device Connections...</b>"
"Settings_USB_NoDevicesFound" "<font color=red><b>No Vive Devices are connected.</b></font>"

"Settings_USB_ViveLinkBoxHeader" "<b>Vive Link Box</b>"
"Settings_USB_ViveHeadsetHeader" "<b>Headset</b>"

"Settings_USB_EnhancedStatus" "Show details"
"Settings_USB_Refresh" "Refresh"

"Settings_Developer_General_Header" "Developer"
"Settings_Advanced_Status_Header" "Status Check"
"Settings_Advanced_RoomAndTracking_Header" "Room and Tracking"
"Settings_Advanced_Reset_Header" "Reset"
"Settings_Advanced_Paths_Header" "Paths"
"Settings_Advanced_DirectMode_Header" "Direct Display Mode"
"Settings_Advanced_MotionSmoothing_Header" "Motion Smoothing"
"Settings_Advanced_MotionSmoothing_Description" "Synthesizes new frames to maintain a good experience when the running application cannot keep up."
"Settings_Advanced_MotionSmoothing" "Enable motion smoothing"
"Settings_Advanced_MotionSmoothing_Disabled" "Motion Smoothing is not supported on this gpu or drivers are out of date."
"Settings_Advanced_MotionSmoothing_Disabled_Win7" "Motion Smoothing is not supported on older versions of Windows."

"Settings_Advanced_RefreshRate_Header" "Refresh Rate"
"Settings_Advanced_RefreshRate_HzSuffix" "hz"
"Settings_Advanced_RefreshRate_NotFound" "<b>NOTE:</b> Additional refresh rates are supported by your HMD, but were not detected by the graphics driver. Please verify your headset firmware and graphics drivers are up to date."
"Settings_Advanced_RefreshRate_NotAvailableExtended" "<b>NOTE:</b> Additional refresh rates are supported by your HMD, but SteamVR cannot manage refresh rates when the HMD is in extended mode. <a href='vrmonitor://directmode/enable'><span style='color:white;'>Enable direct mode.</span></a>"
"Settings_Advanced_Restart" "<i>This pending change will take effect once you <a href='vrmonitor://restartsystem'><span style='color:white;'>Restart SteamVR</span></a></i>"

"Settings_Advanced_Supersampling_Header" "Application Resolution"
"Settings_Advanced_AllowSupersampleFiltering" "Enable advanced supersample filtering" 
"Settings_Advanced_Supersampling_Warning" "<b>WARNING:</b> The resolution setting below will affect all applications. To change the resolution for a specific application, visit the Applications tab."
"Settings_Advanced_SupersamplingManualOverride" "Enable custom resolution"
"Explanation_Supersampling_Header" "SteamVR automatically sets your application resolution based on the performance of your GPU."
"Explanation_Supersampling" "*Some applications may need to be restarted for settings to take effect."
"Explanation_SupersamplingFiltering" "Supersampling Filtering Options"

"Settings_GpuInfo_Header" "Hardware"
"Settings_GpuInfo_Headset" "Headset"
"Settings_GpuInfo_NoHeadset" "No Headset Detected"
"Settings_GpuInfo_GpuName" "GPU Name"
"Settings_GpuInfo_GpuDriver" "GPU Driver"
"Settings_GpuInfo_GpuSpeed" "GPU Measured Speed"
"Settings_GpuInfo_Current" "The current setting renders each eye at"
"Settings_GpuInfo_Recommended" "The recommended setting for your GPU and headset is"

"Settings_PerApplication_Header" "Use these options to create unique settings per application"
"Settings_PerApplication_AppResTitle" "Custom Resolution"
"Settings_PerApplication_AppResHeader" "This setting is a multiplier on top of your Video Application Resolution settings. This application may need to be restarted for settings to take effect. (Default is 100%)"
"Settings_PerApplication_AppResFooter" "The current setting renders each eye at <font color=#eeeeee>%1x%2</font>"
"Settings_PerApplication_OverlayVisibleHeader" "Overlay applications are available as tabs in the SteamVR Dashboard."
"Settings_PerApplication_OverlayVisibleCheckbox" "Start this overlay application when SteamVR launches."
"Settings_PerApplication_DashboardSuffix" "(Overlay Application)"
"Settings_PerApplication_CustomSuffix" "(Custom)"

"Settings_PerApplication_MotionSmoothing_Header" "Motion Smoothing"
"Settings_PerApplication_MotionSmoothing_On" "Enabled"
"Settings_PerApplication_MotionSmoothing_Off" "Disabled"
"Settings_PerApplication_MotionSmoothing_Checkbox_Default" "Use global setting (Currently %1)"
"Settings_PerApplication_MotionSmoothing_Checkbox_ForceOn" "Always enable"
"Settings_PerApplication_MotionSmoothing_Checkbox_ForceOff" "Always disable"
"Settings_PerApplication_MotionSmoothing_Checkbox_AlwaysOn" "Force always-on (WARNING: Application will run at half framerate)"

"Settings_PerApplication_Reprojection_Header" "Reprojection"
"Settings_PerApplication_Reprojection_Checkbox" "Use legacy reprojection mode"
"Settings_PerApplication_Reprojection_Description" "Checking this option will disable asynchronous reprojection for this title."

"Settings_Audio_Device_HMD"  "VR Headset"
"Settings_Audio_Device_Other"  "Other"
"Settings_Audio_AudioPlay"  "Audio output device"
"Settings_Audio_AudioRecord"  "Audio input device"
"Settings_Audio_HDMIGain"  "Enable Gain reduction on VIVE HDMI Audio"
"Settings_Audio_Default"  "Default"
"Settings_Audio_AudioMirrorPlay"  "Mirror audio to device"
"Settings_Audio_AudioMirrorUnsupported"  "Audio mirroring is not supported on this computer"
"Settings_Audio_AudioMirrorEnable"  "Enable audio mirror"

"BaseStation_Channel_Text" "Channel %1"
"BaseStation_Mode_Text" "Mode %1"

"SystemReport_Issues" "Issues"
"SystemReport_Main" "Main"
"SystemReport_Devices" "Devices"
"SystemReport_USB" "USB"
"SystemReport_Logs" "Logs"
"SystemReport_Configuration" "Configuration"
"SystemReport_System" "System"
"SystemReport_Chaperone" "Chaperone"
"SystemReport_LighthouseDB" "LighthouseDB"
"SystemReport_Raw" "Raw"

"SystemReport_Title" "System Report"
"SystemReport_Refresh" "Refresh"
"SystemReport_CopyToClipboard" "Copy To Clipboard"
"SystemReport_SaveToFile" "Save to File"
"SystemReport_SaveSystemReport" "Save System Report"
"SystemReport_UnableToOpenFile" "Unable to open file"
"SystemReport_Data" "Data"
"SystemReport_RawText" "Raw Text"
"SystemReport_Entry_SteamVR" "SteamVR"
"SystemReport_Progress_ParseReport" "Parse Report"

"SystemReport_PrepareReport" "Preparing Report"
"SystemReport_DiscoverIssues" "Discovering issues"
"SystemReport_DiscoverDisplays" "Discovering Displays"
"SystemReport_DiscoverDevices" "Discovering Devices"
"SystemReport_DiscoverUSB" "Discovering USB"
"SystemReport_PrepareLogs" "Preparing Logs"
"SystemReport_DiscoverConfiguration" "Discovering Configuration"
"SystemReport_DiscoverChaperone" "Discovering Chaperone"
"SystemReport_DiscoverLighthouseDB" "Discovering LighthouseDB"


"Main_Systray_Error_Title" "System Tray"
"Main_Systray_Error_Message" "There is no system tray on this computer."
"Main_Information_Title" "SteamVR"
"Main_CanSetInstallationPath_Message" "The installation path could not be located.\n\nSteamVR can set an installation path based on its current executable path."
"Main_JumplistEntry_RunFirstApplication" "First Application"
"Main_JumplistEntry_RunRoomSetup" "Room Setup"
"Main_JumplistEntry_RunTutorial" "Tutorial"
"Main_JumplistEntry_Settings" "Settings"
"Main_JumplistEntry_Advanced" "Advanced"
"Main_JumplistEntry_SystemReport" "System Report"
"Main_JumplistEntry_Quit" "Quit"
"Main_RuntimeFailed_Message" "The runtime was not able to start.\n\n%1\n\nYou can reset the current set runtime\n%2\nbased on the executable path of SteamVR\n%3\n"

"VRManifest_Imported_Title" "OpenVR Manifest file imported"
"VRManifest_Imported_Message" "OpenVR Manifest file imported: \n  %1"

"MenuAction_Compositor_ShowMirror" "Show VR View"
"MenuAction_Compositor_HideMirror" "Hide VR View"
"MenuAction_IdentifyController" "Identify Controller"
"MenuAction_QuickCalibrate" "Quick Calibrate"
"Explanation_QuickCalibrate" "Quickly reset your Room Setup. For Standing and Room Scale VR, new bounds will be centered on your headset on the floor in the center of your space."
"MenuAction_ResetRuntimeAndQuit" "Reset SteamVR path"
"Explanation_ResetRuntimeAndQuit" "Reset your SteamVR path based on the directory SteamVR is launched from."
"MenuAction_RemoveAllSteamVRUSBDevices" "Remove All SteamVR USB Devices"
"Explanation_RemoveAllSteamVRUSBDevices" "Remove all USB devices related to SteamVR from this system to reinstall drivers."
"MenuAction_DisableEnhancedPowerManagement" "Disable Power Management"
"Explanation_DisableEnhancedPowerManagement" "Disable Windows Enhanced Power Management for SteamVR USB Devices if you experience mysterious loss of tracking or inability to pair wireless controllers. "
"MenuAction_ResetAllSettingsAndQuit" "Reset all Settings and Restart"
"MenuAction_RebootVive" "Restart headset"
"Explanation_RebootVive" "Restarting your headset may fix USB-related issues."
"MenuAction_RestartSteamVR" "Restart SteamVR"
"Explanation_RestartSteamVR" "Restarting SteamVR may fix USB-related issues."
"MenuAction_ResetDismissableWarnings" "Reset Warnings"
"Explanation_ResetDismissableWarnings" "Temporary warnings are reset and will show again as needed."

"QuickCalibrate_SmallSpace" "Small Space"
"QuickCalibrate_MediumSpace" "Medium Space"
"QuickCalibrate_LargeSpace" "Large Space"
"QuickCalibrate_GiganticSpace" "Gigantic Space"
"QuickCalibrate_CabalSpace" "Cabal Space"
"QuickCalibrate_StandingSpace" "Standing Space"
"QuickCalibrate_DK2Default" "DK2 Default"

"Advanced_Title" "Advanced"
"Advanced_Advanced" "Advanced"
"Advanced_Developer" "Developer"
"Advanced_General" "General"
"Advanced_Applications" "Applications"
"Advanced_Audio" "Audio"
"Advanced_Devices" "Devices"
"Advanced_RoomOverview" "Chaperone"
"Advanced_Compositor" "In-Headset"
"Advanced_Paths" "Paths"
"Advanced_Reset" "Reset"
"Advanced_Performance" "Video"
"Advanced_Camera" "Camera"
"Advanced_Bluetooth" "Bluetooth"
"Advanced_BaseStation" "Base Station"
"Advanced_USB" "USB"

"Advanced_HMD" "Headset"
"Advanced_Controller" "Controller"
"Advanced_Generic_Tracker" "Tracker"
"Advanced_Base" "Base"

"Advanced_RuntimePath" "SteamVR Path:"
"Advanced_ConfigPath" "Config Path:"
"Advanced_LogPath" "Log Path:"
"Advanced_ApplyPathsAndRestart" "Apply Paths and Restart"
"Advanced_SetNewPath" "Set new path..."

"Advanced_PerfGraphInHMD" "Display GPU performance graph in headset"

"Advanced_AllowSavingOfTimingInfo" "Allow saving of timing info"
"Advanced_AutoSaveTimingInfoOnExit" "Auto-save timing info on exit"
"Advanced_SaveFrameDataNow" "Save Frame Data"

"Advanced_DrawingCompositor" "Compositor"
"Advanced_DrawingApp" "Application"
"Advanced_DrawingCompShouldBeApp" "Compositor"
"Advanced_DrawingUnclear" "Unknown"

"Advanced_BoundsDrawing" "Chaperone Bounds On"
"Advanced_BoundsNotDrawing" "Chaperone Bounds Off"

"Advanced_ReprojectionOn" "Reprojection On"
"Advanced_ReprojectionOff" "Reprojection Off"

"Advanced_AsyncActive" "Async Reprojection On"
"Advanced_AsyncNotActive" "Async Reprojection Off"
"Advanced_DirectModeDisabled" "Direct Mode Off"

"Advanced_MotionEstimationActive" "Motion Smoothing On"
"Advanced_MotionEstimationNotActive" "Motion Smoothing Off"
"Advanced_MotionEstimationDisabled" "Motion Smoothing Unavailable"

"Advanced_NormalFrame" "Normal Frame"
"Advanced_MotionSmoothedFrame" "Reprojected w/ Motion Smoothing"
"Advanced_ReprojectedFrame" "Reprojected w/o Motion Smoothing"
"Advanced_OneThirdFramerate" "One-third framerate"
"Advanced_DroppedFrame" "Display Error"
"Advanced_AppRequestedThrottling" "App requested throttling (cpu bound)"

"Advanced_DashboardUp" "Dashboard On"
"Advanced_DashboardDown" "Dashboard Off"

"MessageBox_OK" "OK"
"MessageBox_Cancel" "Cancel"
"MessageBox_Exit" "Exit"
"MessageBox_SetAndRestart" "Set and Restart"
"MessageBox_Continue" "Continue"
"MessageBox_Yes" "Yes"
"MessageBox_RestartSteamVR" "Restarting SteamVR..."
"MessageBox_Retry" "Retry"
"MessageBox_Done" "Done"
"MessageBox_RestartNow" "Restart SteamVR"
"MessageBox_RestartLater" "Restart Later"
"MessageBox_Next" "Next"
"MessageBox_Submit" "Submit"
"MessageBox_Stop" "Stop"
"MessageBox_Forget" "Forget"
"MessageBox_RefreshAll" "Refresh All"
"MessageBox_OpenWirelessSettings" "Bluetooth Settings"
"MessageBox_RemindMeLater" "Remind Me Later"

"MonitorController_NotAbleToStartSteam" "Not able to start Steam."

"Advanced_Header_CollisionBounds" "Chaperone Bounds"
"Advanced_Explanation_CollisionBounds" "Chaperone bounds appear when you approach the edges of your available space."
"Advanced_FloorBoundsAlwaysOn" "Floor bounds always on"
"Button_ResetCollisionBounds" "Reset to Default"
"CollisionBounds_Beginner" "Beginner"
"CollisionBounds_Intermediate" "Intermediate"
"CollisionBounds_Squares" "Squares"
"CollisionBounds_Advanced" "Advanced"
"CollisionBounds_Developer" "Developer"

"CompositorBackground_Header"		"Background Style"
"CompositorBackground_Color"		"Color"
"CompositorBackground_Image"		"Image"
"Compositor_SelectImage"			"Select Image..."
"Compositor_SelectColorHeader"		"Select a color for your in-headset background."
"Compositor_SelectImageHeader"		"Select an image for your in-headset background."
"Compositor_ResetToDefault" 		"Reset to Default"

"Info_UnknownURL_Title" "SteamVR"
"Info_UnknownURL_Message" "That link isn’t quite hooked up yet. If the error you are trying to diagnose persists, please visit the <a style ='color: rgb(%r, %g, %b);' href='http://steamcommunity.com/app/358720/discussions/'>SteamVR Developer Forums</a> for help."

"PairingWizard_CheckForDongles_Title" ""
"PairingWizard_CheckForDongles_Header" ""
"PairingWizard_CheckForDongles_Content" "Check for available wireless receivers..."

"PairingWizard_HelperAppFailed_Title" ""
"PairingWizard_HelperAppFailed_Header" ""
"PairingWizard_HelperAppFailed_Content" "Calling the helper application failed with error %1."
"PairingWizard_HelperAppFailed_Error_FailedToStart" "'Failed to Start' (0)"
"PairingWizard_HelperAppFailed_Error_Crashed" "'Crashed' (1)"
"PairingWizard_HelperAppFailed_Error_Timedout" "'Timedout' (2)"
"PairingWizard_HelperAppFailed_Error_ReadError" "'ReadError' (3)"
"PairingWizard_HelperAppFailed_Error_WriteError" "'WriteError' (4)"
"PairingWizard_HelperAppFailed_Error_UnknownError" "'UnknownError' (5)"

"PairingWizard_HelperAppFailed_MoreInfo" "More info"
"PairingWizard_HelperAppFailed_MoreInfo_URL" "http://www.valvesoftware.com"

"PairingWizard_NoDonglesAvailable_Title" "Two controllers already in use"
"PairingWizard_NoDonglesAvailable_Header" ""
"PairingWizard_NoDonglesAvailable_Content" "To pair additional controllers, at least one of your controllers must be turned off. Only two controllers can be connected at a time."

"PairingWizard_NoDonglesDetected_Title" "No headset detected"
"PairingWizard_NoDonglesDetected_Header" ""
"PairingWizard_NoDonglesDetected_Content" "Your headset must be connected properly in order to pair new controllers."

"PairingWizard_PairController_Title" "Pair a New Controller"
"PairingWizard_PairController_Success_Title" "Success!"
"PairingWizard_PairAnotherController" "Pair Another Controller"

"PairingWizard_LookingForControllers_Header" "Looking for controller..."
"PairingWizard_LookingForControllers_Content" "Press and hold the App and System buttons until your controller chimes.\n\nIts light will begin blinking blue to indicate that it is in pairing mode."
"PairingWizard_TimeoutHappened_Header" "No Controller Detected"
"PairingWizard_TimeoutHappened_Content" "Make sure your controller is charged and near your headset when pairing."
"PairingWizard_PairingFailed_Header" "Pairing Failed"
"PairingWizard_PairingFailed_Content" "Make sure your controller is charged and stays near your headset when pairing."
"PairingWizard_Success_MoreDonglesAvailable_Header" "Controller Paired!"
"PairingWizard_Success_MoreDonglesAvailable_Content" "Your controller is paired and ready."
"PairingWizard_Success_NoMoreDonglesAvailable_Header" "Controller Paired!"
"PairingWizard_Success_NoMoreDonglesAvailable_Content" "Your controller is paired and ready."

"FirmwareWizard_UpdateMoreFirmware" "Update More Devices"

"FirmwareWizard_Nag_Title" "Recommended Device Update"

"FirmwareWizard_Shutdown_Title" "Update Device"
"FirmwareWizard_Shutdown_TextContent" "To update your device, SteamVR will need to quit any currently running VR applications.\n\nWould you like to continue?"
"FirmwareWizard_WaitingForShutdown_TextContent" "Preparing system for device update..."
"FirmwareWizard_ShutdownForRecovery_TextContent" "A component of your hardware requires a device update to restore it to an operational state.\n\nWould you like to continue?"
"FirmwareWizard_ShutdownForMandatoryUpdate_TextContent" "Your headset requires a device update to continue using SteamVR.\n\nWould you like to continue?"
"FirmwareWizard_DeviceOverview_Title" "Update Device"
"FirmwareWizard_DeviceOverview_Nagging_Title" "Device Updates Required"
"FirmwareWizard_DeviceOverview_TextContent" "Which device would you like to update?"
"FirmwareWizard_DeviceOverview_TextContent_Nag" "Required device updates are available. Select a device to update."
"FirmwareWizard_DeviceOverview_UpdateAvailable" "Update available"
"FirmwareWizard_DeviceOverview_UpToDate" "Up to date"
"FirmwareWizard_DeviceOverview_NoUpdateDataAvailable" "No update data available"
"FirmwareWizard_DeviceOverview_FailedToUpdate" "Failed To Update"
"FirmwareWizard_DeviceOverview_LookingForDevice" "Looking For Device...."
"FirmwareWizard_DeviceOverview_WirelessServicesRequired" "This Update requires Wireless Services"

"FirmwareWizard_UpdateHeadset_Start_Title" "Update Headset"
"FirmwareWizard_UpdateHeadset_Start_UpperText" ""
"FirmwareWizard_UpdateHeadset_Start_MiddleText" "Plug the headset into your computer."
"FirmwareWizard_UpdateHeadset_Start_LowerText" "\nThe update will start automatically once your headset is detected."

"FirmwareWizard_UpdateHeadset_Progress_Title" "Update Headset"
"FirmwareWizard_UpdateHeadset_Progress_UpperText" ""
"FirmwareWizard_UpdateHeadset_Progress_MiddleText" "Updating headset. This could take several minutes..."
"FirmwareWizard_UpdateHeadset_Progress_LowerText" "WARNING: Do not unplug the headset, plug in any additional devices, or make any other system changes while this device is being updated. Doing so can render this headset unusable."

"FirmwareWizard_UpdateHeadset_Fail_Title" "Device Update Failed"
"FirmwareWizard_UpdateHeadset_Fail_UpperText" "Device update failed."
"FirmwareWizard_UpdateHeadset_Fail_MiddleText" "Make sure your headset is connected properly and securely. If this continues to fail, quit SteamVR and unplug your headset from its power source. Then plug your headset back in, launch SteamVR, and try again."
"FirmwareWizard_UpdateHeadset_Fail_LowerText" ""

"FirmwareWizard_UpdateHeadset_Success_Title" "Update Headset"
"FirmwareWizard_UpdateHeadset_Success_UpperText" "Success!"
"FirmwareWizard_UpdateHeadset_Success_MiddleText" "Headset successfully updated. You may need to unplug and then replug your headset's power cable for it to register as updated."
"FirmwareWizard_UpdateHeadset_Success_LowerText"  " "

"FirmwareWizard_UpdateController_Start_Title" "Update Controller"
"FirmwareWizard_UpdateController_Start_UpperText" ""
"FirmwareWizard_UpdateController_Start_MiddleText" "Plug this controller into your computer with a micro-USB cable. You can use the same cable that is used to charge your controllers."
"FirmwareWizard_UpdateController_Start_LowerText" "The update will start automatically once your controller is detected."

"FirmwareWizard_UpdateController_Progress_Title" "Update Controller"
"FirmwareWizard_UpdateController_Progress_UpperText" "" 
"FirmwareWizard_UpdateController_Progress_MiddleText" "Updating controller. This could take several minutes..."
"FirmwareWizard_UpdateController_Progress_LowerText" "WARNING: Do not unplug the controller, plug in any additional devices, or make any other system changes while this device is being updated. Doing so can render this controller unusable."

"FirmwareWizard_UpdateController_Fail_Title" "Device Update Failed"
"FirmwareWizard_UpdateController_Fail_UpperText" "Controller update failed."
"FirmwareWizard_UpdateController_Fail_MiddleText" "Make sure your controller is securely connected to your computer by micro-USB. If this continues to fail, quit SteamVR. If your controller didn't turn off, turn it off by pressing and holding the system button. Then launch SteamVR and try again."
"FirmwareWizard_UpdateController_Fail_LowerText" "Click 'Retry' below to try again."

"FirmwareWizard_UpdateController_Success_Title" "Update Controller"
"FirmwareWizard_UpdateController_Success_UpperText" "Success!"
"FirmwareWizard_UpdateController_Success_MiddleText" "Controller successfully updated. You may need to turn the controller off and then on again for it to register as updated."
"FirmwareWizard_UpdateController_Success_LowerText" " "

"FirmwareWizard_UpdateGenericTracker_Start_Title" "Update Tracker"
"FirmwareWizard_UpdateGenericTracker_Start_UpperText" ""
"FirmwareWizard_UpdateGenericTracker_Start_MiddleText" "Plug this tracker into your computer with a micro-USB cable. You can use the same cable that is used to charge your tracker."
"FirmwareWizard_UpdateGenericTracker_Start_LowerText" "The update will start automatically once your tracker is detected."
					  
"FirmwareWizard_UpdateGenericTracker_Progress_Title" "Update Tracker"
"FirmwareWizard_UpdateGenericTracker_Progress_UpperText" "" 
"FirmwareWizard_UpdateGenericTracker_Progress_MiddleText" "Updating tracker. This could take several minutes..."
"FirmwareWizard_UpdateGenericTracker_Progress_LowerText" "WARNING: Do not unplug the tracker, plug in any additional devices, or make any other system changes while this device is being updated. Doing so can render this tracker unusable."
					  
"FirmwareWizard_UpdateGenericTracker_Fail_Title" "Device Update Failed"
"FirmwareWizard_UpdateGenericTracker_Fail_UpperText" "Tracker update failed."
"FirmwareWizard_UpdateGenericTracker_Fail_MiddleText" "Make sure your tracker is securely connected to your computer by micro-USB. If this continues to fail, quit SteamVR. If your tracker didn't turn off, turn it off by pressing and holding the system button. Then launch SteamVR and try again."
"FirmwareWizard_UpdateGenericTracker_Fail_LowerText" "Click 'Retry' below to try again."
					  
"FirmwareWizard_UpdateGenericTracker_Success_Title" "Update Tracker"
"FirmwareWizard_UpdateGenericTracker_Success_UpperText" "Success!"
"FirmwareWizard_UpdateGenericTracker_Success_MiddleText" "Tracker successfully updated. You may need to turn the tracker off and then on again for it to register as updated."
"FirmwareWizard_UpdateGenericTracker_Success_LowerText" " "

"FirmwareWizard_UpdateBasestation_Start_Title" "Update Base Station"
"FirmwareWizard_UpdateBasestation_Start_UpperText" ""
"FirmwareWizard_UpdateBasestation_Start_MiddleText" "1. Unmount and unplug your base station.\n\n2. Use a micro-USB cable to plug the base station into a USB port on your computer. You can use the same cable that is used to charge your controllers.\n\n3. While holding down the channel button on the back of the base station, plug in your base station's power cord."
"FirmwareWizard_UpdateBasestation_Start_LowerText" "4. The update will start automatically once your base station is detected and you may release the channel button."

"FirmwareWizard_UpdateBasestation_Choice_Title" "Update Base Station"
"FirmwareWizard_UpdateBasestation_Choice_UpperText" ""
"FirmwareWizard_UpdateBasestation_Choice_MiddleText" "The update can happen manually or wirelessly."
"FirmwareWizard_UpdateBasestation_Choice_LowerText" ""

"FirmwareWizard_UpdateBasestation_Wireless_Title" "Update Base Station"
"FirmwareWizard_UpdateBasestation_Wireless_UpperText" ""
"FirmwareWizard_UpdateBasestation_Wireless_MiddleText" "This update will happen wirelessly. Do not unplug your base stations while they are being updated."
"FirmwareWizard_UpdateBasestation_Wireless_LowerText" ""

"FirmwareWizard_UpdateBasestation_Progress_Title" "Update Base Station"
"FirmwareWizard_UpdateBasestation_Progress_UpperText" ""
"FirmwareWizard_UpdateBasestation_Progress_MiddleText" "Updating base station. This could take several minutes..."
"FirmwareWizard_UpdateBasestation_Progress_LowerText" "WARNING: Do not unplug the base station, plug in any additional devices, or make any other system changes while this device is being updated. Doing so can render this base station unusable."

"FirmwareWizard_UpdateBasestation_WirelessProgress_Title" "Update Base Station"
"FirmwareWizard_UpdateBasestation_WirelessProgress_UpperText" ""
"FirmwareWizard_UpdateBasestation_WirelessProgress_MiddleText" "Updating base station. This could take several minutes..."
"FirmwareWizard_UpdateBasestation_WirelessProgress_LowerText" "WARNING: Do not unplug the base station, plug in any additional devices, or make any other system changes while this device is being updated. Doing so can render this base station unusable."

"FirmwareWizard_UpdateBasestation_Fail_Title" "Base Station Update Failed"
"FirmwareWizard_UpdateBasestation_Fail_UpperText" "This device update failed."
"FirmwareWizard_UpdateBasestation_Fail_MiddleText" "Make sure your base station is securely connected to your computer by micro-USB. If this continues to fail, quit SteamVR and unplug your base station's power cable. Then launch SteamVR, and try again."
"FirmwareWizard_UpdateBasestation_Fail_LowerText" "Click 'Retry' below to try again."

"FirmwareWizard_UpdateBasestationWireless_Fail_Title" " Base Station Update Failed"
"FirmwareWizard_UpdateBasestationWireless_Fail_UpperText" "This device update failed."
"FirmwareWizard_UpdateBasestationWireless_Fail_MiddleText_UsingLinkBox" "If this device update continues to fail without making progress... <ul><li>Quit SteamVR.<li>Unplug and replug the Link Box power cable.<li>Unplug and replug the Base Station power cable.<li>Launch SteamVR, and try again.</ul>"
"FirmwareWizard_UpdateBasestationWireless_Fail_MiddleText" "If this device update continues to fail without making progress... <ul><li>Quit SteamVR.<li>Unplug and replug the Base Station power cable.<li>Launch SteamVR, and try again.</ul>"
"FirmwareWizard_UpdateBasestationWireless_Fail_NonceRejected" "This Base Station needs to be rediscovered optically by a restart of SteamVR before the update can proceed."
"FirmwareWizard_UpdateBasestationWireless_Fail_PairingLockout" "This Base Station needs to be power cycled and rediscovered optically by a restart of SteamVR before the update can proceed. Please unplug and then replug the Base Station's power cable."
"FirmwareWizard_UpdateBasestationWireless_Fail_VersionRejected" "This Base Station has a newer version of the update and has rejected it. Please unplug and then replug the Base Station's power cable."
"FirmwareWizard_UpdateBasestationWireless_Fail_USBConnected" "An unexpected USB connection to the Base Station is preventing the wireless update.<br><br><font color=#aaaa00>Please unplug the USB cable that is plugged into the Base Station.</font>"
"FirmwareWizard_UpdateBasestationWireless_Fail_BaseStuckInDFU" "An unexpected USB connection to the Base Station is preventing the wireless update from finishing.<ul><li><font color=#aaaa00>Unplug the Base Station's power cable.<li>Unplug the USB cable that is plugged into the Base Station.<li>Replug only the Base Station's power cable.<li>Wait 30 seconds for the Base Station to finish its internal update.</font></ul><br>The Base Station LED may be off during its internal update.<br>Do not unplug or make any other connections to the Base Station during its update."
"FirmwareWizard_UpdateBasestationWireless_Fail_BaseNeedsPowerCycle" "This Base Station needs to be power cycled to continue the update.<br><br><font color=#aaaa00>Please unplug and then replug the Base Station's power cable before continuing.</font>"
"FirmwareWizard_UpdateBasestationWireless_Fail_ClickRetry" "Click 'Retry' below to try again."
"FirmwareWizard_UpdateBasestationWireless_Fail_ClickCancel" "Click 'Cancel' below to restart SteamVR."

"FirmwareWizard_UpdateBasestationWireless_Fail_MiddleText_UsingLinkBox_BS20" "If this device update continues to fail without making progress... <ul><li>Quit SteamVR.<li>Unplug any USB cable connected to the Base Station.<li>Do NOT connect USB to the Base Station.<li>Unplug and replug the Link Box power cable.<li>Unplug and replug the Base Station power cable.<li>Launch SteamVR and try again.</ul>"
"FirmwareWizard_UpdateBasestationWireless_Fail_MiddleText_BS20" "If this device update continues to fail without making progress... <ul><li>Quit SteamVR.<li>Unplug any USB cable connected to the Base Station.<li>Do NOT connect USB to the Base Station.<li>Unplug and replug the Base Station power cable.<li>Launch SteamVR and try again.</ul>"

"FirmwareWizard_UpdateBasestation_Success_Title" "Update Base Station"
"FirmwareWizard_UpdateBasestation_Success_UpperText" "Success!"
"FirmwareWizard_UpdateBasestation_Success_MiddleText" "Base Station successfully updated. You may need to unplug and then replug your base station's power cable for it to register as updated."
"FirmwareWizard_UpdateBasestation_Success_LowerText" "When re-mounting, take care not to change your base stations' channels."

"FirmwareWizard_UpdateBasestationWireless_Success_Title" "Update Base Station"
"FirmwareWizard_UpdateBasestationWireless_Success_UpperText" "Success!"
"FirmwareWizard_UpdateBasestationWireless_Success_MiddleText_BS10" "Base Station successfully updated. You may need to unplug and then replug your base station's power cable for it to register as updated."
"FirmwareWizard_UpdateBasestationWireless_Success_MiddleText_BS20" "Base Station successfully updated."
"FirmwareWizard_UpdateBasestationWireless_Success_LowerText" ""

"FirmwareWizard_Information_Title" "Device Update"
"FirmwareWizard_WizardIsAlreadyBusy_Message" "This update can not be started at this time, as there is already a device update in progress."

"FirmwareWizard_WirelessServicesRequired_Title" "Update Base Station"
"FirmwareWizard_WirelessServicesRequired" "Bluetooth services need to be enabled to wirelessly update this Base Station.\n\nPlease enable the SteamVR Bluetooth Service.\n"

"FirmwareWizard_ProgressTextLeft" "("
"FirmwareWizard_ProgressTextRight" ")"
"FirmwareWizard_ProgressTextMiddle" "of"
"FirmwareWizard_ProgressPercent" "[ %1% ]"
"FirmwareWizard_ProgressPercentStarting" "[ Starting... ]"
"FirmwareWizard_ProgressPercentFinishing" "[ Finishing... ]"

"FirmwareWizard_WatchmanUpdate" "Tracking Device Update"		
"FirmwareWizard_WatchmanFPGAUpdate" "Tracking Device Update"
"FirmwareWizard_WatchmanRecovery" "Tracking Device Update"
"FirmwareWizard_DongleUpdate" "Wireless Receiver Update"
"FirmwareWizard_CameraUpdate" "Camera Update"
"FirmwareWizard_CameraRecovery" "Camera Update"
"FirmwareWizard_RadioUpdate" "Radio Update"
"FirmwareWizard_VRCUpdate" "Device Update"
"FirmwareWizard_DisplayUpdate" "Display Update"
"FirmwareWizard_DisplayFPGAUpdate" "Display Update"
"FirmwareWizard_AudioUpdate" "Audio Update"
"FirmwareWizard_UpdateType_WatchmanV3PeripheralUpdate" "Peripheral Device Update"

"FirmwareWizard_EnterBootloaderMode" "Preparing to update..."
"FirmwareWizard_ExitBootloaderMode" "Finishing update..."
"FirmwareWizard_WatchmanDiskUpdate" "Device Update"
"FirmwareWizard_BaseStationBluetoothBootloaderUpdate" "Device Update"
"FirmwareWizard_BaseStationBluetoothRadioUpdate" "Device Update"
"FirmwareWizard_BaseStationBluetoothMCUUpdate" "Device Update"
"FirmwareWizard_AudioBridgeUpdate" "Device Update"
"FirmwareWizard_ImageBridgeUpdate" "Device Update"

"FirmwareWizard_UpdateBasestation_Manual" "USB"
"FirmwareWizard_UpdateBasestation_Bluetooth" "Wireless"
"FirmwareWizard_UpdateBasestation_Continue" "Continue"

"RebootHelper_ServiceStatus" "Status: %1"
"RebootHelper_ServiceError" "Error: %1"
"RebootHelper_StartingSteamVRShutdown" "Shutting down..."
"RebootHelper_RebootingVive" "Restarting SteamVR..."
"RebootHelper_ConnectingToVive" "Connecting to headset..."
"RebootHelper_RestartingSteamVR" "Restarting SteamVR..."
"RebootHelper_Cancel" "Cancel"
"RebootHelper_Status_WaitingForDevice" "Waiting For device..."
"RebootHelper_Status_Connected" "Connected!"

"MenuAction_SteamVRWebsite_URL" "http://steamvr.steampowered.com"
"MenuAction_SteamVRCommunity_URL" "http://steamcommunity.com/app/250820/discussions/"
"MenuAction_SteamVRHardwareDiscussions_URL" "http://steamcommunity.com/app/358720/discussions/"
"MenuAction_SteamVRDeveloperSupport_URL" "https://developer.valvesoftware.com/wiki/SteamVR"
"MenuAction_SteamWorksDeveloperSupport_URL" "http://steamcommunity.com/groups/steamworks/discussions"

"BluetoothLinkStatus_Unknown" "Unknown"
"BluetoothLinkStatus_ViveLinkNotAccessible" "Bluetooth error"
"BluetoothLinkStatus_SemaphoreFileNotAccessible" "Bluetooth error"
"BluetoothLinkStatus_WrongToken" "Bluetooth error"
"BluetoothLinkStatus_Running" "Running"
"BluetoothLinkStatus_StoppedOrPaused" "Stopped"
"BluetoothLinkStatus_Transient" "Changing"

"BluetoothControllerStatus_Unknown"							"Unknown"
"BluetoothControllerStatus_ServiceNotFound"					"Bluetooth capability not found. Please verify your SteamVR installation."
"BluetoothControllerStatus_ServiceError"					"Bluetooth Error: BT-%1"
"BluetoothControllerStatus_LinkBoxNotDetected"				"Link Box with Bluetooth capability not detected. Check link box connections, then unplug and replug power to the link box to reset it, then restart SteamVR."
"BluetoothControllerStatus_NoBluetoothDevice"				"Bluetooth capability not detected."
"BluetoothControllerStatus_NoBluetoothDeviceUpdateNeeded"	"Bluetooth capability not detected. A device update is needed to enable this feature. Hover over the headset icon and select Update Device."
"BluetoothControllerStatus_BluetoothDriverNotInstalled"		"Link Box Bluetooth driver not installed."
"BluetoothControllerStatus_BluetoothDriverNeedsUpdate"		"Link Box Bluetooth driver needs to be updated."
"BluetoothControllerStatus_BluetoothDriverInstalling"		"Installing Bluetooth driver..."
"BluetoothControllerStatus_Connecting"						"Connecting..."
"BluetoothControllerStatus_Disconnecting"					"Disconnecting..."
"BluetoothControllerStatus_FailedConnection"				"Bluetooth connection failed. Check link box connections, then unplug and replug power to the link box to reset it, then restart SteamVR."
"BluetoothControllerStatus_Connected"						"Bluetooth connected"

"NeedRoomSetupNoLaunch_Message" "This application cannot run until you've performed Room Setup. Would you like to perform Room Setup now?"

"WorkshopUpload_DialogTitle"	"SteamVR Workshop Uploader"
"WorkshopUpload_NoItem"			"(New)"
"WorkshopUpload_SelectExisting"	"Edit"
"WorkshopUpload_SelectContentType"	"Type"
"WorkshopUpload_SelectContentType_Background"	"Background"
"WorkshopUpload_SelectContentType_Environment"	"Environment Model"
"WorkshopUpload_SelectContentType_Controller"	"Controller Model"
"WorkshopUpload_SelectContentType_Camera"		"Camera Model"
"WorkshopUpload_SelectContentType_Basestation"	"Basestation Model"
"WorkshopUpload_Title"			"Name"
"WorkshopUpload_Desc"			"Description"
"WorkshopUpload_Thumbnail"		"Thumbnail File (400x300, 1 MB max)"
"WorkshopUpload_MainFile"		"File"
"WorkshopUpload_Cancel"			"Cancel"
"WorkshopUpload_Upload"			"Submit"
"WorkshopUpload_SelectImage"	"Select Image"
"WorkshopUpload_ImagesFilter"	"Images (*.jpg *.png)"
"WorkshopUpload_ObjFilter"		"Models (*.obj)"
"WorkshopUpload_Visibility"			"Visibility"
"WorkshopUpload_Visibility_Public"			"Public"
"WorkshopUpload_Visibility_FriendsOnly"		"Friends Only"
"WorkshopUpload_Visibility_Private"			"Private"
"WorkshopUpload_Tags"							"Tags"
"WorkshopUpload_Tag_Nature"						"Nature"
"WorkshopUpload_Tag_Tech"						"Tech"
"WorkshopUpload_Tag_City"						"City"
"WorkshopUpload_Tag_Space"						"Space"
"WorkshopUpload_Tag_Game"						"Game"
"WorkshopUpload_Tag_Abstract"					"Abstract"
"WorkshopUpload_Error"			"Error"
"WorkshopUpload_Error_SteamClientNotFound"	"Cannot start the SteamVR Workshop Uploader because the Steam Client is not running."
"WorkshopUpload_Error_NoTitle"	"Please provide a name"
"WorkshopUpload_Error_NoDesc"		"Please provide a description"
"WorkshopUpload_Error_DescTooLong"	"The description cannot be greater than 8000 characters."
"WorkshopUpload_Error_NoFile_Thumbnail"		"Please choose a valid thumbnail image"
"WorkshopUpload_Error_NoFile_MainFile"		"Please choose a valid file"
"WorkshopUpload_Error_TooLarge_Thumbnail"		"Thumbnail image must be smaller than 1 MB"
"WorkshopUpload_Error_TooLarge_MainFile"		"Files cannot be larger than 1 GB"
"WorkshopUpload_Error_InvalidType_Thumbnail_Background"	"Thumbnail images must be either png or jpg files"
"WorkshopUpload_Error_InvalidType_Thumbnail_Environment"	"Thumbnail images must be either png or jpg files"
"WorkshopUpload_Error_InvalidType_Thumbnail_Controller"	"Thumbnail images must be either png or jpg files"
"WorkshopUpload_Error_InvalidType_Thumbnail_Camera"	"Thumbnail images must be either png or jpg files"
"WorkshopUpload_Error_InvalidType_Thumbnail_Basestation"	"Thumbnail images must be either png or jpg files"
"WorkshopUpload_Error_InvalidType_MainFile_Background"		"Background images must be either png or jpg files"
"WorkshopUpload_Error_InvalidType_MainFile_Environment"		"Environment model files must be of type obj"
"WorkshopUpload_Error_InvalidType_MainFile_Controller"		"Controller model files must be of type obj"
"WorkshopUpload_Error_InvalidType_MainFile_Camera"			"Camera model file must be of type obj"
"WorkshopUpload_Error_InvalidType_MainFile_Basestation"		"Basestation model file must be of type obj"
"WorkshopUpload_Error_LimitExceeded"	"Steam Error \"Limit Exceeded.\" Please ensure that the thumbnail is smaller than 1 MB."
"WorkshopUpload_Error_CannotCreateUploadDir"		"Failed to create temporary upload directory!"
"WorkshopUpload_Error_Generic"		"There was a problem uploading the file. Please try again later."
"WorkshopUpload_Error_NoItemsToEdit"	"No existing files were found to edit!"
"WorkshopUpload_Progress_Title"		"SteamVR Workshop"
"WorkshopUpload_Progress_Start"		"Contacting SteamVR Workshop..."
"WorkshopUpload_Progress_PreparingConfig"		"Preparing configuration..."
"WorkshopUpload_Progress_PreparingContent"		"Processing files..."
"WorkshopUpload_Progress_UploadingContent"		"Uploading files..."
"WorkshopUpload_Progress_UploadingPreview"		"Uploading preview file..."
"WorkshopUpload_Progress_CommittingChanges"		"Finishing up..."

"KnockKnock_Title" "Want my attention?"
"KnockKnock_Text" "I'm in VR right now. If you'd like to get my attention please click the button below or press the '%1' key."
"KnockKnock_Button" "Knock Knock"
"KnockKnock_Notification_Text" "Knock Knock\nSomeone outside VR would like your attention."

"About_Title" "About SteamVR"
"About_DateString" "MMM d, yyyy %1 hh:mm"
"About_DateString_Argument" "at"
"About_BuiltPrefix" "Built %1"
"About_VersionPrefix" "Version %1"

"MenuAction_CalibrateController" "Calibrate Controller"
"CalibrateControllerTrackpad_Title" "Calibrate Controller Trackpad"
"CalibrateControllerTrackpad_Start_UpperText" "This will calibrate your controller's trackpad. You should calibrate the trackpad if it seems jittery or you are seeing unexpected touches."
"CalibrateControllerTrackpad_Start_LowerText" "Make sure you are not touching the trackpad and click Next to continue."
"CalibrateControllerTrackpad_Progress_UpperText" "Calibrating trackpad ..."
"CalibrateControllerTrackpad_Progress_LowerText" ""
"CalibrateControllerTrackpad_Success" "Success!"
"CalibrateControllerTrackpad_End_UpperText" "Your controller's trackpad is now calibrated."
"CalibrateControllerTrackpad_End_LowerText" ""

"PlaylistEntryDefaultName" "Entry"
"PlaylistListDefaultName" "Playlist"

"PlaylistEditor_WindowTitle" "Playlist Editor"
"PlaylistEditor_New" "New"
"PlaylistEditor_Load" "Load"
"PlaylistEditor_Save" "Save"
"PlaylistEditor_SaveAs" "Save As"
"PlaylistEditor_FileName_Label" "Filename:"
"PlaylistEditor_Name_Label" "Name:"
"PlaylistEditor_Entries_Tab" "Entries"
"PlaylistEditor_Placecard_Tab" "Placecard"
"PlaylistEditor_General_Tab" "General"
"PlaylistEditor_Detail_Name_Label" "Name:"
"PlaylistEditor_Detail_Entry_Text" "Entry"
"PlaylistEditor_Detail_Executable_Label" "Executable:"
"PlaylistEditor_Detail_DotDotDot_Label" "..."
"PlaylistEditor_Detail_Arguments_Label" "Arguments:"
"PlaylistEditor_Detail_Environment_Label" "Environment:"
"PlaylistEditor_Detail_WorkingDirectory_Label" "Working Directory:"
"PlaylistEditor_Detail_UseCompositor_Checkbox" "Use Compositor"
"PlaylistEditor_Detail_Total_Label" "Total:"
"PlaylistEditor_Detail_WaitForNext_Checkbox" "Wait for Next"
"PlaylistEditor_Detail_PrerollPlacecard_Label" "Preroll Placecard:"
"PlaylistEditor_Detail_NothingSet_Text" "Nothing set."
"PlaylistEditor_Detail_PrerollDuration_Label" "Preroll Duration:"
"PlaylistEditor_Detail_PostrollDuration_Label" "Postroll Duration:"
"PlaylistEditor_Detail_AudioVolume_Label" "Audio Volume:"
"PlaylistEditor_Detail_AudioVolumeInPercent_Label" " in % "
"PlaylistEditor_Detail_AudioVolumeOverride_Checkbox" "Override"
"PlaylistEditor_Header_Length" "Length"
"PlaylistEditor_Header_Durations" "Durations"
"PlaylistEditor_Header_Name" "Name"
"PlaylistEditor_Plus_Button" "+"
"PlaylistEditor_Minus_Button" "-"
"PlaylistEditor_Duration_Label" "Duration:"
"PlaylistEditor_Play_Button" "Play"
"PlaylistEditor_Placecard_Test_Button" "Test"
"PlaylistEditor_Placecard_Clear_Button" "Clear"
"PlaylistEditor_Placecard_Load_Button" "Load"
"PlaylistEditor_Placecard_WidthInMeters_Label" "Width in Meters:"
"PlaylistEditor_Placecard_OffsetX_Label" "Offset X:"
"PlaylistEditor_Placecard_OffsetY_Label" "Offset Y:"
"PlaylistEditor_Placecard_OffsetZ_Label" "Offset Z:"
"PlaylistEditor_General_Environment_Label" "Environment:"
"PlaylistEditor_General_WorkingDirectory_Label" "Working Directory:"
"PlaylistEditor_General_DotDotDot_Label" "..."
"PlaylistEditor_General_ForceAudioVolume_Label" "Force Audio Volume:"
"PlaylistEditor_General_PlaySoundBeforeEnd_Label" "Play sound before end:"
"PlaylistEditor_General_Seconds_Label" "seconds"
"PlaylistEditor_General_WaitForNext_Label" "Wait for Next:"
"PlaylistEditor_NotSavedYet_Text" "Not saved yet."
"PlaylistEditor_AddEntry_Text" "Entry %1"
"PlaylistEditor_LoadPlaylist_FileSelector" "Load Playlist"
"PlaylistEditor_SavePlaylist_FileSelector" "Save Playlist"
"PlaylistEditor_SelectExecutable_FileSelector" "Select Executable Path"
"PlaylistEditor_SelectWorkingDirectory_FileSelector" "Select Working Directory"
"PlaylistEditor_SelectPrerollPlacecard_FileSelector" "Select Preroll Placecard"
"PlaylistEditor_SelectImageForPlacecard_FileSelector" "Select Image for Placecard"

"PlaylistPlayer_WindowTitle" "Playlist Player"
"PlaylistPlayer_WindowTitle_WithName" "Playlist Player - %1"
"PlaylistPlayer_All_Checkbox" "All"
"PlaylistPlayer_ForceSoundVolume_Checkbox" "Force Sound Volume"
"PlaylistPlayer_PlaySoundBeforeEnd_Checkbox" "Play Sound before entry ends in seconds"
"PlaylistPlayer_ManualNext_Checkbox" "Manual Next"
"PlaylistPlayer_Length_Header" "Length"
"PlaylistPlayer_Durations_Header" "Durations"
"PlaylistPlayer_Name_Header" "Name"
"PlaylistPlayer_Total_Label" "Total:"
"PlaylistPlayer_RunSelected_Button" "Run Selected"
"PlaylistPlayer_RunSingle_Button" "Run Single"
"PlaylistPlayer_RemoteControlInHeadset_Checkbox" "Remote Control in Headset"
"PlaylistPlayer_Next_Label" "Next:"
"PlaylistPlayer_Current_Label" "Current:"
"PlaylistPlayer_Overall_Label" "Overall:"
"PlaylistPlayer_PlaySound_Button" "Play Sound"
"PlaylistPlayer_Run_Button" "Run"
"PlaylistPlayer_Stop_Button" "Stop"
"PlaylistPlayer_PauseTimer_Button" "Pause Timer"
"PlaylistPlayer_Next_Button" "Next"
"PlaylistPlayer_MasterVolume_Label" "Master Volume"
"PlaylistPlayer_Continue_Button" "Continue"
"PlaylistPlayer_State_NotRunning" "Not Running"
"PlaylistPlayer_State_Starting" "Starting"
"PlaylistPlayer_State_Running" "Running"
"PlaylistPlayer_State_Unknown" "Unknown State"
"PlaylistPlayer_ProcessError_FailedToStart" "Failed To Start"
"PlaylistPlayer_ProcessError_Crashed" "Crashed"
"PlaylistPlayer_ProcessError_Timeout" "Timeout"
"PlaylistPlayer_ProcessError_WriteError" "Write Error"
"PlaylistPlayer_ProcessError_ReadError" "Read Error"
"PlaylistPlayer_ProcessError_Unknown" ""
"PlaylistPlayer_StatusOfCurrentDemo_Text" "Status of current demo: %1 %2"
"PlaylistPlayer_PrerollState_Text" "Preroll "
"PlaylistPlayer_PostrollState_Text" "Postroll "
"PlaylistPlayer_StatusOfCurrentEntryPause_Text" "%1Status of current entry: Pause"
"PlaylistPlayer_StatusOfCurrentEntryNone_Text" "No status information for current entry."

"PlaylistOverlay_Title" "Playlist Remote Control"
"PlaylistOverlay_NextEntry" "Next Entry"
"PlaylistOverlay_PauseTimer" "Pause Timer"
"PlaylistOverlay_GotoFirstEntry" "Goto First Entry"

"BugReporter_Title"	"Report a Bug"
"BugReporter_Explanation" "Thank you for helping Valve improve SteamVR.\n\nThis bug reporter generates a SteamVR System Report which gathers system, environment, and SteamVR logging for use by Valve for diagnostics."
"BugReporter_ForPersonalSupport" "This is not a support ticket and you will not receive a direct response. To receive personalized SteamVR support from an agent, please visit the support site."
"BugReporter_SteamVRSupport" "SteamVR Support"
"BugReporter_Subject" "Subject:"
"BugReporter_CharactersRemaining" "%1 Characters Remaining"
"BugReporter_Description" "Description:"
"BugReporter_ReportType"	"Report Type:"
"BugReporter_ReportType_Bug" "Bug"
"BugReporter_ReportType_FeatureRequest" "Feature Request"
"BugReporter_ReportType_Feedback" "Feedback"
"BugReporter_Owner"	"Owner:"
"BugReporter_Priority" "Priority:"
"BugReporter_PreviewReport" "Preview Report"
"BugReporter_IncludeReportAndLogs" "Include System Report and Logs"
"BugReporter_IncludeCrashDumps" "Include Crash Dumps"
"BugReporter_SubjectRequired" "Please supply a subject."
"BugReporter_DescriptionRequired" "Please supply a description."
"BugReporter_FailedToCreateZip" "Failed to create ZIP attachment."
"BugReporter_SteamLoginRequired" "You need to be logged in to your Steam account to Report a Bug."
"BugReporter_NotAvailable" "Report a Bug is not available on this version of SteamVR."
"BugReporter_InitializationFailure" "Report a Bug failed to initialize.\n\nError: BR-%1"
"BugReporter_SubmissionSuccess"	"Submission Successful.\n\nYou should receive a confirmation email shortly."
"BugReporter_SubmissionFailure"	"Submission Failure.\n\nThe Bug Collector may be busy. Please try submitting again.\n\nError: BR-%1\n"
"BugReporter_SubmissionTimeout" "Submission Timeout.\n\nThe network upload is taking longer than expected. Please try again later.\n"
"BugReporter_PreviewReportTitle" "Report a Bug - Preview Report"
"BugReporter_ProgressSubmitting" "Submitting..."
"BugReporter_ProgressSubmittingPercent" "Submitting...%1%"

"ScanForBaseStations_Scanning"	"Scanning For Base Stations...\n\n%1 Seconds Remaining."
"ScanForBaseStation_Incomplete" "Scanning For Base Stations...\n\nIncomplete."
"ScanForBaseStation_FoundStations" "Scan Complete"
"ScanForBaseStation_NoKnownStations" "Scan Complete\n\nThere are broadcasting Base Stations within proximity, but none of them have been used for tracking yet."
"ScanForBaseStation_NoStationsFound" "Scan Complete\n\nThere are no broadcasting Base Stations within proximity."
"ScanForBaseStations_Refresh" "Scan Again"

"BS20_ConfigureChannel_Title"								"Base Station 2.0 Channel Configuration"
"BS20_ConfigureChannel_BluetoothRequired"					"Channel configuration requires Bluetooth communication to be enabled.\n\nPlease enable Bluetooth communication in Settings."
"BS20_ConfigureChannel_BaseStationName"						"Configuring %1 on Channel %2"
"BS20_ConfigureChannel_Description"							"Select an unused channel for this Base Station to avoid potential tracking conflicts."
"BS20_ConfigureChannel_InUseByPrefix"						"Currently used by:"
"BS20_ConfigureChannel_Legend"								"Denotes a channel used by other Base Stations in radio proximity."
"BS20_ConfigureChannel_AutomaticConfiguration"				"Automatic Configuration"
"BS20_ConfigureChannel_AutoConfig_NoChannelConflictsFound"	"There are no channel conflicts."
"BS20_ConfigureChannel_AutoConfig_NoFreeChannels"			"There are no free channels to resolve %1 potential channel conflicts. You may need to manually configure channels."
"BS20_ConfigureChannel_AutoConfig_NotEnoughFreeChannels"	"There are only enough free channels to resolve %1 out of %2 potential channel conflicts. Continue and resolve conflicts?"
"BS20_ConfigureChannel_AutoConfigContinue"					"There are %1 potential channel conflicts that can be automatically resolved by re-assigning their channels. Continue and resolve conflicts?"
"BS20_ConfigureChannel_AutoConfig_SuccessfulCompletion"		"Automatic Configuration completed.\n\nThere are no channel conflicts."
"BS20_ConfigureChannel_AutoConfig_Incomplete"				"Automatic Configuration completed.\n\nThere are %1 remaining potential channel conflicts. You may need to manually configure channels."
"BS20_ConfigureChannel_AutoConfig_UnknownChannels"			"There are %1 Base Stations whose channels could not be determined that may result in potential channel conflicts.\n"
"BS20_ConfigureChannel_ChannelConfigurationFailure"			"%1 failed to accept the requested channel configuration."
"BS20_ConfigureChannel_ScanForMore"							"Scan For More"
"BS20_ConfigureChannel_Apply"								"Apply"	
"BS20_ConfigureChannel_Connecting"							"Connecting..."
"BS20_ConfigureChannel_Channel"								"Channel: %1"
"BS20_ConfigureChannel_ConnectionFailure"					"%1 failed to connect."
"BS20_ConfigureChannel_FirmwareUpdateRequired"				"%1 requires a device update to enable channel configuration."
"BS20_ConfigureChannel_ConflictWarning"						"%1 is using the same channel as another Base Station."
"BS20_ConfigureChannel_FailedToConnectRetry"				"%1 failed to connect. Click 'Retry' to try again."
"BS20_ConfigureChannel_ConflictOnChannel"					"Potential conflict on Channel %1"
"BS20_ConfigureChannel_NoConflictOnChannel"					"No conflict on Channel %1"
"BS20_ConfigureChannel_ProgressScanComplete"				"Scan Completed.\n\nClick on a channel link to change it."
"BS20_ConfigureChannel_ProgressScanNoStationsFound"			"Scan Completed.\n\nThere are no broadcasting 2.0 Base Stations within your proximity."
"BS20_ConfigureChannel_ProgressScanning"					"Scanning For Base Stations...\n\n%1 Seconds Remaining."
"BS20_ConfigureChannel_ProgressConnecting"					"\nConnecting To Base Stations...\n"
"BS20_ConfigureChannel_ProgressWritingChannel"				"\nWriting Channel...\n"
"BS20_ConfigureChannel_ProgressCancelling"					"\nCancelling...\n"
"BS20_ConfigureChannel_VisibleNowInTracking"				"Visible now in this tracking session."
"BS20_ConfigureChannel_ObservedInTracking"					"Observed in a prior tracking session."
"BS20_ConfigureChannel_Identify"							"Click to identify Base Station."
"BS20_ConfigureChannel_IdentifyRequiresFirmareUpdate"		"%1 requires a device update to enable device identification."
"BS20_ConfigureChannel_RSSI"								"RSSI: %1"
"BS20_ConfigureChannel_ConflictLegend"						"Channel conflict with another Base Station."
"BS20_ConfigureChannel_ErrorLegend"							"Click on channel link for more information."
"BS20_ConfigureChannel_CancelledConnection"					"%1 connection cancelled. Click channel link to try again."

"BS_PowerManagement_Title"									"Base Station Power Management"
"BS_PowerManagement_Enable"									"Enable Power Management *"
"BS_PowerManagement_Enable_Explanation"						"Power managed Base Stations go into standby mode when SteamVR is not in use, and wake up again when SteamVR starts.\n"
"BS_PowerManagement_Enable_Warning"							"<font color=#ffffff>* NOT RECOMMENDED for shared tracking spaces with multiple SteamVR users.</font>"
"BS_PowerManagement_PartialStandby"							"Standby" 
"BS_PowerManagement_PartialStandby_Explanation"				"Base Stations will power off only their lasers for a faster wake up when SteamVR starts."
"BS_PowerManagement_PartialStandby_HybridExplanation"		"Base Station 2.0 will power off only their lasers for a faster wake up when SteamVR starts."
"BS_PowerManagement_FullStandby"							"Sleep"
"BS_PowerManagement_FullStandby_Explanation"				"Base Stations will power off their lasers and motors."
"BS_PowerManagement_RefreshLink"							"Refresh"
"BS_PowerManagement_ForgetBase"								"Forget this device"
"BS_PowerManagement_BaseStations"							"Managed Base Stations"
"BS_PowerManagement_VisibleNowInTracking"					"Visible now in this tracking session."
"BS_PowerManagement_ObservedInTracking"						"Observed in a prior tracking session."
"BS_PowerManagement_Identify"								"Click to identify Base Station."
"BS_PowerManagement_IdentifyRequiresFirmareUpdate"			"%1 requires a device update to enable device identification."
"BS_PowerManagement_FailedToConnectRefresh"					"%1 failed to connect. Click 'Refresh' to try again."
"BS_PowerManagement_ConnectionFailureLegend"				"Connection failure. Click 'Refresh' to try again."

"BS20_UpdateRecovery_Title"									"Base Station 2.0 Update Recovery"
"BS20_UpdateRecovery_BluetoothRequired"						"Update recovery requires Bluetooth communication to be enabled.\n\nPlease enable Bluetooth communication in Settings."
"BS20_UpdateRecovery_Scanning"								"Scanning For Base Stations...\n\n%1 Seconds Remaining."
"BS20_UpdateRecovery_Incomplete"							"Scanning For Base Stations...\n\nIncomplete."
"BS20_UpdateRecovery_FoundStations"							"Scan Completed.<br><br><font color=#ffffff>These Base Stations have incomplete updates.<br><br>Please select a Base Station and click 'Recover Device' to continue.</font>"
"BS20_UpdateRecovery_NoStationsFound"						"Scan Completed.\n\nThere are no broadcasting Base Stations needing recovery within proximity."
"BS20_UpdateRecovery_Refresh"								"Scan Again"
"BS20_UpdateRecovery_UpdateDevice"							"Recover Device"

"BS_PromotePowerManagement_Title"							"SteamVR"
"BS_PromotePowerManagement_Explanation"						"SteamVR can power manage your Base Stations.<br><br>Power managed Base Stations go into standby mode when SteamVR is not in use and wake up again when SteamVR starts.<br>"
"BS_PromotePowerManagement_Enable"							"Enable Base Station Power Management *"
"BS_PromotePowerManagement_Explanation2"					"<br><font color=#ffffff>* NOT RECOMMENDED for shared tracking spaces with multiple SteamVR users.</font>"
"BS_PromotePowerManagement_ExitNow"							"Exit Now (%1)"

"Monitor_SpontaneousQuitDialog_Title" "Unexpected SteamVR Error"
"Monitor_SpontaneousQuitDialog_Message" "SteamVR has encountered a critical error."
"Monitor_SpontaneousQuitDialog_Restart" "Restart SteamVR"
"Monitor_SpontaneousQuitDialog_Quit" "Quit SteamVR"

"Monitor_RestartRequestedDialog_Title" "Restart for %1 driver"
"Monitor_RestartRequestedDialog_MessageNoReason" "Driver %1 needs to restart SteamVR."
"Monitor_RestartRequestedDialog_Message" "%1"
"Monitor_RestartRequestedDialog_Restart" "Restart SteamVR"
"Monitor_RestartRequestedDialog_Quit" "Quit SteamVR"

"oculus_display_lost" "The Oculus system has lost its connection to the display. Please check your headset's connection and then restart."
"oculus_requested_quit" "The Oculus system requested that SteamVR exit."

"Monitor_WakingBaseStations" "Base stations waking up..."
"Monitor_PuttingBaseStationsInStandby" "Base stations standing by..."

"VRApplicationError_None" "No Error"

"VRApplicationError_AppKeyAlreadyExists" "Application is already registered"
"VRApplicationError_NoManifest" "No application Manifest"
"VRApplicationError_NoApplication" "No application"
"VRApplicationError_InvalidIndex" "Invalid Index"
"VRApplicationError_UnknownApplication" "Unknown application"
"VRApplicationError_IPCFailed" "Unable to request application"
"VRApplicationError_ApplicationAlreadyRunning" "Application is already running"
"VRApplicationError_InvalidManifest" "Invalid Manifest"
"VRApplicationError_InvalidApplication" "Application was invalid"
"VRApplicationError_LaunchFailed" "Application launch failed"
"VRApplicationError_ApplicationAlreadyStarting" "Application was already starting"
"VRApplicationError_LaunchInProgress" "Another application was already starting"
"VRApplicationError_OldApplicationQuitting" "Another application was already exiting"
"VRApplicationError_TransitionAborted" "Application start aborted by user"
"VRApplicationError_IsTemplate" "This is a template application"
"VRApplicationError_SteamVRIsExiting" "SteamVR is exiting"

"VRApplicationError_BufferTooSmall" "Provided buffer was too small"
"VRApplicationError_PropertyNotSet" "Property was not set"
"VRApplicationError_UnknownProperty" "Unknown property"
"VRApplicationError_InvalidParameter" "Invalid parameter"

"Key_Escape_Abbreviation" "ESC"

"HeadsetView_Title" "VR View"
"HeadsetView_MenuLabel" "Menu"
"HeadsetView_PressKeyToExit" "Press %1 to exit Full Screen"
"HeadsetView_FullscreenButtonLabel" "Full Screen"
"HeadsetView_DockButtonLabel" "Dock VR View"
"HeadsetView_UndockButtonLabel" "Undock VR View"
"HeadsetView_HideButtonLabel" "Hide VR View"
"HeadsetView_EyeMode_Both" "Both Eyes"
"HeadsetView_EyeMode_Left" "Left Eye"
"HeadsetView_EyeMode_Right" "Right Eye"
"HeadsetView_EyeMode_BothLeftDominant" "Both Eyes - Left Dominant"
"HeadsetView_EyeMode_BothRightDominant" "Both Eyes - Right Dominant"
"HeadsetView_DebugCommands" "Open Debug Commands"
}
}